Skip to content
Established 1975 A Trusted Brand
Made In Britain Homegrown Company
Safe & Secure Feel Confident as You Shop
Gardening Blog
Established 1975 A Trusted Brand
Made In Britain Homegrown Company
Safe & Secure Feel Confident as You Shop
Gardening Blog
Tropf Blumat Tank Connector

Tropf Blumat Tank Connector

If you wish to operate the Tropf Blumat Watering System from a 'tank' of water rather than mains water, you will need a Tank Connector to allow you to attach the ¼ inch tubing direct to the water supply. 
£3.15 - £3.15
£3.15
£3.15 - £3.15
£3.15
SKU TBC
This robust Tank Connector is simple to install.

Unscrew the Tank Connector so that you have three separate parts ready to fit:

Part A - A 2 inch (5cm) long screwed fitting which should be fitted through the side or base of the tank, after drilling an 11mm hole (you will need access to the inside of the tank in order to fit this). 

Part B - A rubber washer to fit onto the outside of the tank.

Part C - A screw fitting lock nut to attach back onto the Tank Connector, on the outside of the tank, screw tight up to the washer for a secure, watertight connection.

You are then ready to fit the ¼ inch / 6mm tubing to the barbed fitting at the end of the Tank Connector.